How to Replace a UPVC Door Replacement Lock

If the lock on your door is jammed or isn’t functioning as it should, you may be looking to replace lock on patio door it. It may seem like a complicated process but it’s actually quite simple and doesn’t require the services of a locksmith.

Few basic tools, some patience, and lots of care will suffice. Here’s what you must do:

Measure the Door

It’s possible to replace your uPVC doors if they are experiencing difficulty locking them or if they don’t close. If you’ve just moved into a brand new property, or a tenant has moved out without returning keys, or your multipoint gearbox is showing signs of wear and tear, changing the barrel of your lock to an entirely new one will offer an extra layer security.

It is necessary to take measurements before buying a new lock. This will ensure that the new lock will fit properly and not interfere with your home’s security. The most important of these is the backset. This is the distance between the centre of your keyhole bore hole and the edge of your door. It’s usually 2 3/8 or even 2 3/4 inches. You can measure the length using a measuring tape and note down the results.

You should also know what the thickness of the faceplate is. This is the amount of thickness the faceplate covers the lock mechanism. If you can, buy an alternative lock from the same manufacturer, since they are manufactured to the same dimensions. If you cannot find the manufacturers name or mark, just take a measurement of the width of the existing cylinder. You can also measure the width of the existing cylinder by placing a pencil over the keyhole.

Once you have the dimensions you can begin to remove the old cylinder. Start by loosening the screw that holds the handle in place using a Phillips-head screwdriver. After that, loosen the screws holding the interior and exterior handles together. After removing these screws, you can pull out the barrel screw on the handle’s exterior to release the cylinder.

If the cylinder is stuck in the lock you can use WD-40, or another fluid. It’s important to not push it out with forceful turns can damage the internal gearbox and lead to additional issues with your lock. You may also want to look into upgrading your lock with anti-snap or anti-bump security, which are more robust against attacks from thieves.

Source the Lock

Whether you’re replacing upvc door lock an old lock after a break-in or upgrading for better security there are a few points to keep in mind when sourcing your new door lock. To ensure the quality and fit, make sure you buy the right sized cylinder from an established manufacturer. You’ll also need a few essential tools to complete the job, such as a screwdriver, tape measure and rubber mallet.

There are several signs your upvc lock is wearing out and must be replaced. The lock could have visible damage or the handle could be loose and not fitting correctly. If the lock starts jamming or isn’t locking at all, it’s time to consider a replacement.

Installing the lock correctly is crucial once you’ve picked the correct lock. This will ensure that it locks and works correctly. Always follow the manufacturer’s instructions to secure the new multipoint lock mechanism to the upvc door panel and to attach the correct faceplates and handles. Test the mechanism by locking the door and then unlocking it from both the outside and inside. When you’ve finished the job then it’s time for a celebration.

It might seem daunting to replace a Upvc lock however, you can do it on your own without the help of a locksmith. If you can recognize the signs that your lock is in need to be replaced and having the right tools to hand, it can be relatively easy to complete.

Be aware that, like any moving component, a upvc door lock can benefit from some lubrication to run smoothly. A few sprays of silicone or graphite powder lubricant could assist in extending their lifespan by ensuring they are free of excessive friction that can wear them down prematurely. Regularly cleaning your door’s lock mechanisms with WD-40 and a damp cloth is a good way to keep them in good condition.

Remove the Cylinder

It could be time to replace the barrel of your lock in case you’re experiencing issues with your upvc door. This is an easy DIY project and can be completed in only a few minutes. It’s also an effective method to ensure home security. The key to this process is identifying the manufacturer of the lock you have in place so that you can locate a suitable replacement.

A faulty door lock could be a real hassle and a major security risk. It’s not uncommon for locks on uPVC doors to experience issues and it’s essential to keep up with regular maintenance. Experts suggest changing your lock every seven to eight years. If your lock replacement upvc door is seriously damaged or you are not satisfied with its performance, professional help might be worthwhile.

In most cases, a simple pin-based system known as a euro cylinder is utilized for uPVC doors. They are easy to use and are not likely to fail, but they can be vulnerable. It is therefore recommended to replace your lock with a more modern lock that is equipped with anti-snap and anti-bump security to guard against burglaries.

The first step to replace your uPVC lock is to remove the handle and exposing the old cylinder. This can be tricky as there are usually some screws hidden underneath the handles, so ensure you have a screwdriver in your bag. You’ll need to gently pull and UPVC Door Replacement Lock move the cylinder until you loosen it. Once it’s loose then you can pull it out of the socket.

Once you’ve sourced a suitable replacement, it’s just the matter of screwing it in place and then reverse the removal procedure. Be cautious not to tighten too much as this can cause the cylinder to become stuck inside the door and stop working as it should. After everything is back in place, test the uPVC door lock by opening and closing it both sides. You should now be in a position to lock and unlock it with your key! If not, ensure whether the screws are tight and try again.

Install the Lock

You’ll have to do some research first to make sure that the lock you select is appropriate for your door. You’ll need to be aware of the faceplate and backset measurements – that’s the distance from the edge of the composite door replacement lock to the center of the handle or cylinder – and the lock type to ensure that the lock fits properly without any compromise in security.

Once you’ve done that, you can start installing the new lock. Ideally, prop the door open or secure it to ensure that it doesn’t shut during the process. To begin, use a Phillips head driver to loosen the screws that hold the handle in place. Once they’re removed, you should be able to pull the handle’s inner and outer apart.

Now you can begin to take off the old cylinder, which is something you’ll want to do by unscrewing it from its barrel. Once you’ve removed your cylinder then you’ll be able to install the new lock, making sure that you follow the guidelines for the particular model you have. After the lock has been installed you can test it by shutting and opening the door from both the inside and outside, and locking and unlocking it from the interior and then trying it again.

There are a variety of reasons to change the lock on your uPVC doors. It could be that you’ve recently moved in and haven’t got a key, or the previous tenant didn’t return the key or you may want to upgrade to an extra secure lock. It shouldn’t take more than five minutes to replace the lock’s cylinder.

Whether you have a multipoint lock, or a single-point lock, they all work using the same mechanism. This means that they could be susceptible to issues occasionally, such as failing to close or getting stuck. These can be caused by wear and tear, weather conditions, or simply due to daily use. Fortunately, the majority of these issues can be solved with just a little maintenance or the help of a locksmith.